High Impact Polystyrene - HIPS - Styrene Sheet

Matt White is

available in:

  • 0.25mm

  • 0.38mm

  • 0.5mm

  • 0.75mm

  • 1mm

  • 1.5mm

  • 2mm

  • 2.5mm

  • 3mm

  • 4mm

Matt Black is

available in:

  • 0.5mm

  • 0.75mm

  • 1mm

  • 1.5mm

  • 2mm

  • 2.5mm

  • 3mm

Sheet sizes available ( Approx )

  • A4+ - 330mm x 225mm

  • A3+ - 450mm x 330mm

  • A2+ - 660mm x 450mm

This material is undoubtedly one of the best model making plastics available.

Easy to cut, glue and paint. Have a look at our info page.

​​​​​​​Bendy to rigid, a thickness to suit most requirements.

This is an industrial grade sheet which is

supplied without surface protection,

some marks are normally present and should be taken in to account when considering it's final use.

The sheet is primarily used for scratch model making where any surface marks are unimportant as they will be painted or covered. If the sheet is vacuum formed any marks tend to vanish during the heating phase.

The top of the sheet has a fine textured feel almost like a sandblasted finish, with the underside having a silk like finish.

Selecting a larger pack size will give a better price per sheet